Real-time HD wireless transmission from all cameras to all studio set officials, such as the producer, the first assistant/focus operator, and all others. Bringing to the cinematography industry the freedom from cables, saving time, money and enabling fast changes in the set.
The StudioLink 150 is designed to operate in a studio environment, where the capture film must be viewed on the set team in zero latency, and in the same captured quality, keeping the original colors and contrast.
The StudioLink product line includes three family members: StudioLink 150, StudioLink 300 & StudioLink 1000.
StudioLink 150 Transmitter
Wireless transmission of HD video signal from any source to as many display devices as necessary covering range of 150m/500ft.
SDI to SDI or HDMI to HDMI wireless link with zero delay, supporting various resolutions, up to 1080p60.
StudioLink 150 Receiver
Wireless transmission of HD video signal from any source to as many display devices as necessary stretching the covering range up to 150m/500ft.
SDI to SDI or HDMI to HDMI wireless link with zero delay, supporting varied resolutions, up to 1080p60.
StudioLink 150 Reference Design
AMIMON offers its partners a fully enclosed reference design for the StusioLink 150 transmitter and receiver set.
The enclosure is designed to fit the hard mechanical constraints of the cinematography industry: Aluminum case with rubber protective cover for the interface connectors and the antennas.
- Wireless video/audio signals are encrypted using RSA and AES algorithms
- Operates in the 5GHz unlicensed band.
- Effective range of 100m LoS
- Internal antenna
- Remote video monitoring, up to 4 simultaneous screens in multicast mode
- Director screen mobile monitoring
- Indoor and outdoor sets
The studio products, which delivered, are plug-and-play PCB-ready for embedding in any chassis or device. HW and SW design reference are available. Products are targeted to the OEM market, and available in samples as final products.
Video formats and frame rate:
|Interfaces||Tx – 3G SDI to Rx – 3G SDI
Tx – HDMI to Rx – 3G SDI
Tx – 3G SDI to Rx – HDMI
Tx – HDMI to Rx – HDMI
|Some resolution cannot operate on the SDI to HDMI, HDMI to SDI versions.|
|Antennas||2 dBi dual internal antennas||External antennas version is available on demand|
|Operation Range||100 meters (300 Ft)||150 Meters (500ft)|
|Audio||I2S, PCM, SPDIF, AC-3, DTS, Dolby 5.1|
|Multicast||Up to 4 receivers (monitors) to each transmitter (Camera)||Each transmitter can be paired to a maximum of 4 receivers.|
|Operation Frequency||5.1-5.9 GHz||Including Wi-Fi unlicensed frequencies and DFS channels|
|Operation Bandwidth||40 MHz|
|Channel selection||Automatic – Yes
Manual – on demand
|Auxiliary Channel||Downlink – No
Uplink – No
|Downlink – Available
Uplink – on demand
|Used for OEM messages to be transferred between hosts over the air.|
|Latency||< 1 mSec|